1
Wash & scuff
One pass strips the dirt and chalk and preps the surface to bond.
Save 24%Re-Gel Gelcoat Refill
Restore your gelcoat to factory shine — no wet sanding, no buffing experience needed.
- 🇺🇸 Made in the USA
- 🚚 Fast shipping
- 📞 Real human support (918) 641-4514
Description + Whats Included
Bring faded, chalky gelcoat back to life with the same proven Re-Gel formula — now available as a refill for experienced users and repeat customers.
This product includes Re-Gel compound and catalyst only, designed for those who already have applicator pads or prefer to use their own tools. Perfect for maintaining boats, RVs, and other fiberglass surfaces that have already been restored with Re-Gel.
Re-Gel chemically restores oxidized gelcoat instead of coating or masking it, delivering a deep gloss and long-lasting results when applied correctly.
How to Apply
Re-Gel is designed for beginner-friendly DIY application.
- Wash and prepare the surface using the included pre-cleaner and scuff pad.
- Remove remaining wax, grease, and contaminants.
- Mix the Re-Gel formula and catalyst according to the instructions.
- Wipe on a slow, even coat.
- Allow the surface to cure before exposing it to water.
Most projects take approximately 2–8 hours, depending on the size and condition of the surface. Apply in the shade with the surface temperature below 77°F
What Re-Gel Works On
Made for:
- Fiberglass boats
- Gelcoat hulls and decks
- Jet skis and personal watercraft
- Fiberglass RV surfaces
- Faded, dull, chalky, or oxidized gelcoat
Drying, Curing & Care
Re-Gel is normally dry to the touch in approximately one hour, depending on temperature and humidity.
Keep the surface completely dry for at least 24 hours after application. For boats, allow approximately four days of full curing before prolonged water exposure or launching.
Wait approximately 4–7 days before performing a full wash. After curing, regular soap-and-water cleaning is recommended.
Shipping & Returns
Orders are processed within 1–3 business days and typically arrive within 3–8 business days after shipment. Shipping rates are calculated at checkout, and tracking information will be emailed once your order ships.
We currently ship within the United States to valid physical addresses. We do not ship to P.O. boxes. Please confirm your shipping address before placing your order, as we cannot guarantee changes after an order has been submitted.
All sales are final. Because Re-Gel is a specialty chemical product, we do not accept returns or exchanges and do not provide refunds for opened, used, or unwanted products.
If your order arrives damaged, defective, or with missing items, email info@getregel.com within 3 days of delivery. Include your order number, photos of the package and product, and a description of the issue. Eligible claims will be reviewed, and we will work with you on an appropriate resolution.
Re-Gel is not responsible for packages marked as delivered by the carrier or orders shipped to an incorrectly entered address.
For complete details, please review our Shipping Policy and Refund Policy.
Scuff. Wipe. Cure.
A 2-part urethane you wipe on by hand — four steps, one afternoon.
2
Wax & grease remover
Wipe the whole surface down with the included Wax & Grease Remover so no oils or residue are left to block the bond.
3
Mix the two parts
Combine the catalyst with the Re-Gel bottle right before you apply. Mix only what you'll use — once it's catalyzed, the clock starts.
4
Apply slowly
Wipe, even coat, working slowly. On boats, RVs, or jet skis badly beaten up by the sun, lay down a second coat for full color and depth. It cures to a hard, UV-protected finish that holds season after season.
See the Difference On This RV
Before
After
See the Difference On This Boat
Before
After
Frequently Asked Questions
Can Re-Gel be applied over decals and graphics?
Yes. Re-Gel can be applied directly over most factory decals and graphics, helping restore shine across the entire surface without leaving unfinished areas around them.
Older, cracked, peeling, or aftermarket decals should be tested in a small, hidden area before completing the full application.
Can I buff or wax the surface after applying Re-Gel?
Yes. After Re-Gel has fully cured for at least one week, the surface may be lightly buffed or waxed if desired.
Wax is not required to create the restored shine, but it may be used afterward as part of your regular maintenance routine. Avoid aggressive compounds or abrasive products that could damage the restored finish.
What is Re-Gel, and how is it different from wax?
Re-Gel is a 2-part gelcoat restoration system that bonds with the existing surface to restore deep gloss and help protect against UV damage.
Unlike waxes and polishes that sit on top of the surface and wear away, Re-Gel is designed to create a longer-lasting restoration for faded, chalky, or oxidized gelcoat.
How long does Re-Gel last?
Re-Gel can last for years with proper preparation and care. The exact lifespan depends on sun exposure, climate, storage, usage, and maintenance.
Boats and RVs stored covered or indoors will generally maintain the finish longer than surfaces exposed to constant sun and weather.
Which Re-Gel kit do I need?
Choose your kit based on the size and condition of your boat or RV:
- Mini Kit: Boats up to 20 ft or RVs up to 30 ft
- Standard Kit: Boats 20–30 ft or RVs 30–40 ft
- Pro Kit: Up to 1,200 sq. ft.
- Ultra Kit: Up to 1,600 sq. ft.
When between sizes or working on heavily oxidized gelcoat, size up so you do not run out during application.
Re-Gel Gelcoat Refill
$249.97$189.97